Reverse engineering
Calipers, gauges and a photo with a rule in it. The broken part becomes a parametric model with the dimensions that matter called out, and the ones that are missing asked for before anything is quoted.
Design and 3D printing, Newmarket
The part you cannot buy. Designed, printed and fitted.
Replacement parts, jigs, fixtures and brackets for shops, trades, fleets and small manufacturers. Measured from your part, modelled in Autodesk Fusion, printed in the right material, checked against the drawing before it leaves.
Part no.NP-0101
TitleTelematics tracker mount
MaterialASA, matte grey
Qty20
Newmarket, Ontario Pickup by appointment ◆ Drop-off within 50 km ◆ Canada Post across Canada
The stack
- Autodesk Fusion
- Adobe Creative Cloud
- Bambu Studio
- OrcaSlicer
- Bambu Lab P1S
- Polymaker
- Filaments.ca
What the shop does
One shop, from the measurement to the finished part.
Design for printing
Wall thickness, overhangs, orientation, tolerances and inserts are decided in the model, not discovered on the plate. Threads, snap fits and press fits are tuned with a test coupon when the fit is critical.
Engineering materials
PETG for wet and greasy, ASA for sun, polycarbonate for heat and impact, carbon-fibre nylon for load. Printed inside an enclosure, dried first, measured after.
- Machine
- Bambu Lab P1S, enclosed
- Build volume
- 256 × 256 × 256 mm
- Materials
- 15+, PLA to CF nylon
- General tolerance
- ±0.2 mm
- Quote
- In writing, within 24 h
- Lead time
- 2 to 7 days
Selected work
Three of the twelve parts on the work page. Each is designed in Fusion for the industry named, with a dimensioned drawing sheet behind it. Switch to the drawing on any card.
Three kinds of job
Design and print a part.
The bracket that holds the sensor to the bumper. The clip the manufacturer stopped making. The fixture that saves ten minutes a job. Part in, part out, and it fits or the next one is free.
Design and print from $75Print your file.
You already have the STL, 3MF or STEP. It is checked for printability, quoted, and run in the material that suits it.
From $30Batches for business.
Ten of one thing, or a hundred. Jigs, fixtures, mounts, the bracket every truck in the fleet needs. Design once, reorder by text.
Ten or more, 15 percent offHow a job runs
1
Send the part.
A photo with a tape measure in it, a sketch, a file, or the broken piece itself.
2
Written quote inside 24 hours.
Material named, date named. No engineering hours added later.
3
Approve the model.
A turnable 3D model next to your photo before anything prints. A wrong dimension is fixed on screen, not in plastic.
4
Pick it up, or it comes to you.
Measured against the model, then pickup in Newmarket, drop-off within 50 km, or Canada Post anywhere in Canada.
Three guarantees
It fits, or the next one is free.
If a custom part does not fit the dimensions you gave, the next revision and its print are free.
The quote is the number.
Design, revisions, print and finish are in it. No surprise at pickup.
Your files stay yours.
Used for your job and nothing else. Never sold, shared or printed for anyone else.
Materials
Send the part. Get a number by tomorrow.
A photo of the broken piece, a sketch, or just the problem. Quotes go out within 24 hours, Monday to Saturday.